English
简体中文
Español
한국어
Русский
Português
Français
Deutsch
Árabe
日本語
हिंदी
Prancis
Türkçe
Tiếng Việt
Italiano
ไทย
Main Application
This machine adopts hydraulic loading and electronic force measurement. It has functions such as load digital display, loading rate display, load maximum value retention, overload protection and power-off data retention. During the test, the oil supply valve and return valve are manually operated to control the increase and decrease of the test force and the load retention. The test speed is fast and the work efficiency is high. The Machine can be used by placing it horizontally on the ground. It is mainly used for compressive strength tests of building materials such as rocks, concrete, cement products, hollow bricks, fly ash, refractory materials, engineering materials, stones, rubber bearings, and large components. It is an essential equipment for laboratories in industries such as highways, railways, bridges, buildings, building materials colleges and universities, enterprise production, and research institutions.
Technical Parameters
Item | Specification |
Maximum Test Force | 2000 kN |
Range and Measurement Range | 4% ~ 100 F.S |
Relative Error of Test Force Indication | ≤ ±1% |
Upper and Lower Pressure Plate Dimensions | φ220 mm, φ300 mm |
Maximum Spacing Between Upper and Lower Pressure Plates | 320 mm |
Maximum Piston Stroke | 30 mm |
Piston Diameter | φ250 mm |
Rated Pressure of Hydraulic Pump | 40 MPa |
Power Supply Power | Three-phase 0.75 kW |
Overall Dimensions (L×W×H) | 820 × 550 × 1300 mm |
Net Weight | About 750 kg |
